TESO | TEXELSTROOM

Home / Novedad


TESO | TEXELSTROOM

TESO | TEXELSTROOM

C-Job was responsible for the initial, concept & basic design for this double-ended ferry which will sail in spring 2016 between the beautiful Dutch island of Texel and Den Helder. The ferry will be operated by locally owned organization TESO. The challenge was to achieve an increase in 10% more cars without increasing the length (due to less maneuverability) and less wind pressure. Due to the T-shaped design, the car capacity increased with 18% and although the lateral surface increased marginally, the wind pressure was reduced compared to the Dr. Wagemaker. Vripack is responsible for the interior en exterior design of the 'ms. Texelstroom'.

During the Initial Design, C-Job investigated both the LNG as CNG fuel (including HAZID Studies). Eventually TESO decided a “Dual Fuel System” with CNG. Furthermore there is a Hybrid propulsion system with Battery Packs to shave of the peaks in energy demand on board. Solar panels are responsible for about one half of the Hotel function.

C-Job performed many more studies and consultancy tasks like: Windflow/CFD Analyses, hull shape optimization, Intelligent Ventilation study, FEM Analysis, Stability calculations, and much more. Also, C-Job assisted TESO during the build of this vessel at LaNaval Shipyard in Spain



Esta novedad pertenece al expositor: C - JOB NAVAL ARCHITECTS


Otras novedades del expositor

VAN OORD | MPH 9.0

VAN OORD | MPH 9.0...

For the large Dutch dredging company ...


DEME | BONNY RIVER

DEME | BONNY RIVER...

DEME has ordered a 15.000 m3 Multifun...


HARTMAN MARINE | ATLANTIC DAWN

HARTMAN MARINE | ATLANTIC DAWN...

Full design scope done for CIG Shipbu...


GMS | SHAMAL

GMS | SHAMAL...

After being successfully involved wit...


HEESEN YACHTS | GALACTICA

HEESEN YACHTS | GALACTICA...

Nominated for the KNVTS Ship of the y...


CONCORDIA | PUSHER

CONCORDIA | PUSHER...

Concept & Basic Design was done f...



«Volver al expositor